The dustbin transfer truck is suitable for residential quarters, narrow roads, squares, and supermarkets. It is not suitable for the on-site transportation of garbage trucks. It can realize the rapid conversion of garbage bins filled with garbage and empty bins. The barreled garbage transfer truck is suitable for the rapid transfer of barreled garbage on narrow roads.
01. Picture of a dustbin transfer truck
02. Dustbin transfer truck configuration
1. The electronically controlled hydraulic tailgate lifting device is adopted, which can load and unload multiple trash cans at a time. There are two electric control operation modes, fixed and wired. The tailgate power supply is equipped with an independent switch; a safety warning is installed on the lifting tailgate. Flag, reflective warning board, safety chain; electric control operation panel is equipped with emergency stop button for the whole vehicle.
2. A sewage collection box is designed in front of the carriage to collect and discharge the sewage that has leaked and leaked from the trash can to avoid secondary pollution.
3. The vehicle is designed with a cylinder-controlled lifting roof panel. After the roof panel is opened, the height of the cabin is greater than 1850mm to ensure the flexibility of the personnel in the cabin, and the safety device for opening the roof panel is designed to ensure operation Personnel safety, in addition, the height of the vehicle after the top cover is closed is 2150mm, which greatly reduces the height of the vehicle and enables flexible vehicle transfer;
03. Advantages of a dustbin transfer truck
1. The electronically controlled hydraulic tail plate lifting device is adopted, which can load and unload multiple trash cans at one time, which reduces the intensity of manual labor and has high work efficiency.
2. Without additional protection, it can be parked on a level road for loading and unloading operations.
3. Equipped with fixed and wired electric control operation modes, the operation is simple and convenient.
4. An independent switch is provided for the power supply of the tail plate; safety warning flags, reflective warning plates, and safety chains are installed on the lifting tail plate; the electric control operation panel is equipped with an emergency stop button for the whole vehicle.
5. Optional cleaning system can be installed to clean vehicles and trash cans as needed.
6. The carriage can be optionally equipped with side flaps to facilitate the handling of empty barrels and other handling methods and improve efficiency.
7. An optional trash can positioning rod can be installed on the carriage to locate the trash can in the carriage to prevent the trash can from slipping during the driving of the vehicle.
04. Dustbin transfer truck video
