1. Detailed description of the rear load garbage truck
Box structure: The trash can is welded with reinforced beams and high-strength steel plates to form a firm frame structure. The sides are made of a whole plate without tailored welding technology, and the upper and lower reinforcement beams and side plates are integrally formed with special equipment and cold-formed by special equipment. , The large R angle is formed to improve the rigidity. There is no welding seam in the longitudinal direction of the side plate, which effectively avoids defects such as fatigue failure of the welding seam caused by the long-term use of the traditional tailor welding process. The top surface is an arc curved surface, and the bottom of the box is on the side of the box The board adopts advanced tailored welding technology, which avoids the phenomenon of water leakage caused by the long-term use of traditional welding technology. A large-capacity sewage collection tank is installed in the lower part of the front of the box, which improves the storage capacity of vehicle sewage. The overall box has a beautiful appearance and is lightweight. It has the good force and is not easy to deform.
Dozing shovel assembly: The dozing shovel is formed by welding a rectangular steel tube frame and a bending plate. Adjustable sealing strips are installed on both sides and the top of the dozing shovel to ensure the gap between the dozing shovel and the box. , The discharge is clean and thorough.
Filler assembly: Mainly composed of filler shell, sliding plate, scraper, and other components. The filler slide is cold-formed with high-strength wear-resistant materials, and the lower arc plate is made of high-strength wear-resistant materials. , The curved board is processed with a water leak, which is convenient for the sewage inside the filler to flow into the lower sewage storage tank, avoiding the spillage of sewage during transportation. The lower part of the filler is equipped with a large-capacity sewage storage tank, and the sewage tank has two large-caliber sewage Discharge ports; both sides of the skateboard adopt integral nylon sliders, which are self-lubricating, high stability, and have better abrasion resistance; the stressed parts of the scraper adopt local strengthening treatment, which has a firm structure and lightweight. The turning mechanism is tailor-welded by bending materials and profiles, with a firm structure and beautiful appearance. The pressure-bearing parts such as the oil cylinder support, the trash can lifting component, the bucket guide plate, and the connecting rod support are integrally cast with steel castings, and the structure is firm and not easy to break.
2. Related pictures of the rear load garbage truck
3. Detailed description of the rear load garbage truck
(1) Pressure-filling mechanism: The pressure-filling mechanism is composed of a sliding plate, a scraper, and other components. The garbage in the hopper is pressed into the box body through the sliding up and down of the sliding plate and the rotation of the scraper. Each component adopts a good beam plate or box structure, which is firm and light in weight. The filling bucket is made of wear-resistant high-strength steel with good wear resistance.
(2) Feeding device: According to different garbage collection methods, different customers can choose to install bucket type (iron bucket and plastic bucket can be hung) feeding device, bucket type feeding device, and swing arm type feeding device.
(3) Packing device lifting: The lifting device of the pressure filling machine adopts a hydraulic lifting safety circuit, and a one-way balance valve is set on the lifting cylinder in the hydraulic system, which separates the direct connection between the lifting cylinder and the hydraulic hose, Even if the tubing ruptures, the filler will not fall suddenly and cause an accident.
(4) Sewage collection box: The bottom of the box is equipped with a sewage collection box to prevent the sewage in the tank from leaking out, effectively preventing the occurrence of secondary pollution.
(5) Rear electronic control operation: The rear electronic control operation adopts imported PLC integrated control. The logic loop is set to ensure that the operating instructions are executed in order to realize the automatic circulation of the skateboard and the sharp board. The cab control is optional.
(6) Front manual operation: The hydraulic controller at the rear of the cab controls the work of the turnover mechanism and the pressing and filling mechanism to ensure the accuracy and reliability of each mechanism and improve the reliability of the vehicle.
(7) Luxury cab: commercial vehicle configuration, semi-row cab, soft leather steering wheel, new instrument panel, optional electric glass, central locking, high-end atmosphere, comfortable driving.
4. Repair and maintenance of the rear load garbage trucks
(1) The maintenance of the automobile chassis and supporting pumps shall be carried out in accordance with the corresponding operating instructions.
(2) Before the vehicle is used, it should be run-in according to the requirements of the vehicle instruction manual.
(3) For long-distance transfers, there should be fixed anti-skid devices on the front, rear, left, and right sides of the vehicle, and a gap of more than 200mm should be left around.
(4) Regularly check whether each outlet orifice is clogged, and clean up at a time when the debris is found to be clogged.
(5) After each shift is completed, the oil stains should be cleaned, the pipes should be rolled up neatly, the site should be cleaned, and the doors should be closed and locked.
(6) The vehicle should not be used for a long time or stored in winter. When storing, it should be parked in the carport and wiped clean to avoid exposure to the sun and rain.
