inner_banner_news
You are here: News  /  Blog

Introduction to the advantages of FULONGMA’s latest 18-ton electric washing and sweeping truck

2021-11-15 10:19:57

Share to:

Electric washing and sweeping vehicles are sanitation vehicles equipped with cleaning systems such as sweeping brushes, which are mainly used for cleaning operations in large and medium-sized urban sanitation departments. The washing and sweeping truck liberated the work intensity of sanitation workers, improved work efficiency, and reduced secondary pollution such as dust. In order to improve the work rate, a washing and sweeping car was derived, which has stronger performance and is suitable for more complex places.

electric washing and sweeping truck

01. Advantages of electric washing and sweeping truck

1. Fast working speed: fast working speed, large tank volume, road cleaning can be completed in a short time.

2. Wide application: It is widely used in the cleaning of road garbage in urban roads, factories, and parks.

3. Easy to clean: the tank body is made of high-strength steel with high strength. A reinforced ring is set outside the tank, and the inside of the tank is smooth and easy to clean.

electric washing and sweeping truck

4. Reduce costs: 1-2 hours can complete the cleaning of a main urban road, reducing the cost of employment.

5. Strong load capacity: the vehicle chassis is strengthened as a whole, and the load force is strengthened, thereby prolonging the service life.

6. Broad field of view: The cab adopts a widened design with a wide field of view, which is convenient for the driver to pay attention to the road conditions on both sides at any time during driving.

electric washing and sweeping truck

7. Low working noise: The washing and sweeping vehicle adopt pure electric drive, which has low noise during sanitation operations.

02. Detailed configuration of electric washing and sweeping truck

1. Fiber brush: This sweeper adopts fiber brush, which has high hardness and is not easy to wear.

2. Front flushing spraying: equipped with front flushing spraying, it can play a good dust reduction effect, and the floor cleaning effect is good.

electric washing and sweeping truck

3. Reinforced frame: The frame is designed with overall reinforcement, which bears the heavy load, runs stably, and prolongs its service life.

4. Convenient operation: The control interface is simple and intuitive, and the entire vehicle is operated through a 7-inch LCD display, which takes up small space and is convenient to operate.

electric washing and sweeping truck

5. Convenient maintenance: convenient daily maintenance such as disassembly and cleaning of the water filter element, adjustment of the nozzle roller off the ground, and wastewater discharge from the trash can.

03. Precautions for electric washing and sweeping truck

1. Regularly check whether each part is normal, add oil, and check whether the belt meets the requirements for use.

electric washing and sweeping truck

2. Periodically check whether the hydraulic oil is normal. (Foreign objects in the hydraulic oil will greatly affect the normal operation of the solenoid control valve).

3. Always check whether the limit device of the electric push rod of the auxiliary engine clutch is normal.

4. When the control button is switched, there should be an interval of 5 seconds.

electric washing and sweeping truck

5. If the auxiliary engine can drive the fan when the auxiliary engine is started, the auxiliary engine clutch can be in a closed state, so that the service life of the electric push rod can be achieved.

6. If the speed of the auxiliary engine cannot rise, the throttle can be pulled and loosened intermittently.

electric washing and sweeping truck

7. After starting the auxiliary engine to warm up in winter, start the auxiliary engine clutch to the closed state, and the fan and oil pump start to work. 8. In winter, manually turn off the radiator and turn it on after the temperature rises.

RELATED NEWS