The FULONGMA high-performance compression garbage truck is a fully enclosed type. It adopts electrical and hydraulic integration technology. With the help of a mechanical, electrical, and hydraulic combined automatic control system, garbage cans, fillers, and dozers are used to realize garbage dumping. Crushing or flattening, loading forcefully, squeezing the garbage into the carriage, compacting and pushing off. All the sewage in the compression process enters the sewage tank, which solves the problem of secondary pollution during garbage transportation.
01. Product advantages of high-performance compression garbage trucks
1. Electric and hydraulic joint control The control system of this car comprehensively utilizes the advantages of electric and hydraulic control, and the hydraulic valve group is controlled by the electric control system, which improves the reliability and efficiency of use.
2. Fully automatic control can be achieved through the electrical system to meet the power requirements for the waste pressure filling cycle and pushing and unloading. Under other working conditions, the engine is automatically at idle speed, which can reduce power loss and failure rate, and reduce consumption Oil, improving economic use.
3. The trash bin adopts reinforced beams and steel plates to weld a solid frame structure. The sides and top surfaces are arc curved surfaces, with beautiful appearance, lightweight, good stress, and no deformation; the dozer is composed of a rectangular tube frame and a folded panel. Not only the structure is light and handy, but also the garbage can be distributed evenly, and the unloading is clean and thorough.
4. The filler is mainly composed of a filler shell, a sliding plate, a scraper, and other components. Each component adopts a beam plate or a box-shaped structure with good force, which is firm in structure and light in weight.
5. The garbage is in a closed state during compression, filling, and transportation. A special rubber sealing strip is installed on the junction surface of the dustbin and the filler, which is compressed and sealed by a locking device.
6. A unique drain valve is installed on the sewage tank, which is reliable in sealing and not easy to be blocked.
7. The optional filler cover completely covers the filler feeding port, which eliminates the phenomenon of flying garbage and dust caused by the airflow disturbance in the rear of the vehicle during the transfer process, and the appearance is more beautiful.
8. Hydraulic lifting safety circuit-In the hydraulic system of the lifting loader, a two-way balance valve is set. This valve not only ensures the steady drop of the filler but also cuts off the direct connection between the lifting cylinder and the hydraulic hose. Even if the oil pipe bursts, the filler will not fall suddenly, which improves the safety of use.
9. The CAN bus vehicle-mounted controller is used to control, the control circuit is generated in the controller, and the logic loop is used to ensure that the operating instructions are executed in order, and at the same time to ensure that the operating instructions are interlocked, and there are only wiring connections outside, which reduces the occurrence of failures. Avoid accidents caused by misoperation and improve reliability.
10. The specially set emergency brake button can stop the garbage filling mechanism in any state or any position, ensuring the safety of operators and equipment.
11. The combination of the filler and the box body adopts a locking mechanism, the sliding plate is guided by a nylon slider, the structure of the combination of the filler and the box body is reasonable, and the locking and fully sealed technology are adopted.
12. Each mechanism has two operating modes, automatic and manual. If the automatic operation fails, manual operation can be used to complete the mechanism and discharge the garbage, which not only ensures the high efficiency of the garbage truck but also for debugging, maintenance and troubleshooting. Provides great convenience.
02. Rich configuration of a high-performance compression garbage truck
Car body: The garbage can be selected according to the needs of the rectangular car and the new arc-shaped car body. It is refurbished and welded by a high-strength wear-resistant steel plate. The frame design is reasonable and strong. Dozer and shovel slides are arranged in the compartment. The shape is simple, beautiful, light in weight, strong, and not easy to deform. The dozer is composed of a steel pipe frame and an arc-shaped surface plate, which is not only light in structure but also can improve the flow of garbage. Sexual, unloading is clean and thorough.
Feeding device: Different users can choose different bucket (bucket) mechanisms according to different garbage collection methods: hanging bucket flip (can hang iron buckets, plastic trash cans, etc.), dustpan bucket flip, swing arm flip (Can be equipped with a floor bucket) institutions, etc.
Pressure-filling mechanism: The pressure-filling mechanism is composed of a sliding plate, a scraper, etc., through the sliding up and down of the sliding plate and the rotation of the scraping plate, the garbage in the hopper is pressed into the box body, and each component of the linkage operation adopts a beam plate or a box type with good force. Structure, firm structure, lightweight: The filler hopper is made of wear-resistant high-strength steel, which has good wear resistance and improves the service life.
03. Video introduction of a high-performance compressed garbage truck
