For guardrail cleaning vehicles and tunnel cleaning vehicles, many people may not know very well. There are two forms of guardrail cleaning vehicles. One is to install a guardrail cleaning brush in front of the car, and the other is to install a cleaning brush on the left side of the car body, while the tunnel cleaning vehicle has two forms. Not the same, let’s take a look at these two cars together!
01. Function introduction of guardrail cleaning truck
The function of the guardrail cleaning car is to clean the guardrail, but it is also divided into the highway guardrail cleaning car and the street guardrail cleaning car. If it is a highway guardrail cleaning car, use a single-sided cleaning brush. This cleaning brush can be installed in front of the sprinkler, dust suppression, cleaning, and other models, and can be disassembled when not in use. This model is more cost-effective.
If it is a street guardrail cleaning car, use the cleaning brush installed on the side of the body. You can rinse it first, and then use the cleaning brush to clean both sides. This model can also be cleaned on one side, and the effect is very good.
This guardrail cleaning vehicle is composed of a special vehicle chassis, tank body, hydraulic system, cleaning brush, auxiliary engine, high-pressure pump, and other components.
02. Function introduction of tunnel cleaning vehicle
The function of the tunnel cleaning vehicle is to clean the tunnel wall. This type of vehicle has higher requirements because the tunnel wall is curved, so the big arm of the cleaning brush can be adjusted, like a mechanical arm, it can be adjusted front and rear, left and right, and various angles, so that the tunnel can be cleaned in all directions. wall.
A tunnel cleaning truck is composed of a special vehicle chassis, tank body, hydraulic system, cleaning brush boom, cleaning brush, high-pressure pump, and other components. The cleaning brush arm can be installed on the front of the tank body or at the rear of the tank body.
03. Performance characteristics of tunnel cleaning vehicle
1. The cleaning brush is made of special composite cleaning material bristles, with a good cleaning effect and long service life.
2. The machine adopts a two-section folding support arm, which has a large working radius and high efficiency.
3. The driving device can rotate freely at 270°, which is convenient for moving the cleaning brush and changing the construction position.
4. Equipped with a high-pressure water gun, which is convenient for washing vehicles and road surfaces.
5. With the automatic obstacle function, it can automatically detect and maintain the relative position of the cleaning wall (or obstacle) and the cleaning brush, avoid the collision between the cleaning brush and the wall (or obstacle), and prevent the cleaning brush from being damaged. This function can be optional.
6. According to the needs of construction, the cleaning brush can be rotated left and right in the plane of the axis of the vertical link device, and can be locked every 30 degrees.
7. The water tank and piping system are all made of corrosion-resistant stainless steel such as 304.
8. The washing tank is embedded in the water tank, and the washing liquid is added during cleaning, which can carry out the cleaning operation better and faster.
Looking at the characteristics of these two models, the biggest difference between them is that one cleaning brush is fixed on the vehicle, and the other is a cleaning brush that can be rotated and moved, but the performance difference is very big. The guardrail cleaning car can only clean the guardrail. Railings and the tunnel cleaning vehicle can not only clean the tunnel walls but also clean the walls, large-area glass walls, etc., even the guardrails can also be cleaned, it can be said to be a comprehensive multi-functional cleaning vehicle.
