inner_banner_news
You are here: News  /  Blog

The scope and working principle of the FULONGMA natural gas cleaning and sweeping truck

2021-12-09 14:41:28

Share to:

FULONGMA natural gas cleaning and sweeping trucks are equipped with two brush plates in the middle and a wide suction cup in the middle, or a four-screw sweeper and a suction port at the rear. The vehicle can be used as a road sweeper alone for road cleaning and suction operations; it can also be used as a high-pressure washing vehicle for road surface washing and suction operations; it can also be used as a road cleaning and suction vehicle combined with high-pressure flushing to achieve the cleaning, Various combinations of washing and pumping can be used to meet the various needs of different users. The car can be widely used for washing and cleaning operations of urban main roads and viaducts.

natural gas cleaning and sweeping truck

01. Working principle of natural gas sweeper

While the cleaning operation device of the natural gas scrubber is working, the auxiliary engine drives a high-pressure water pump equipped with a special clutch to participate in the work. The high-pressure water pump pressurizes the clean water from the clean water tank and then sends it to the spray rod in the nozzle and the left and right spray rods through the high-pressure pipeline control valve. Each spray rod is equipped with a number of special stainless steel fan nozzles. The fan-shaped water curtain sprayed by the nozzle forms a U-shaped water jet with a total width of not less than 3.5m, which directly washes the road surface, and the water after washing the road surface is sucked back into the trash can to realize the road cleaning.

natural gas cleaning and sweeping truck

02. Product features of natural gas cleaning and sweeping truck:

1. Integrate road sweeping and high-pressure cleaning, adopting the “center-mounted two vertical brushes + center-mounted ultra-wide nozzle + center-mounted side spray bar” method, which has high working efficiency, good maneuverability, multiple functions in one machine, and high vehicle utilization.

2. Centralized operation control in the cab, easy to operate; a manual pump and a spare operation control box are installed outside the cab to facilitate emergency use during maintenance.

natural gas cleaning and sweeping truck

3. A separate auxiliary engine is used to drive the fan and high-pressure water pump to ensure that the power can meet the work needs under various driving conditions.

4. The transmission between the auxiliary engine and the fan adopts a vehicle clutch, which is reliable and easy to replace. The high-pressure water pump adopts an imported pneumatic gear clutch, which can combine and disengage the power quickly, effectively ensuring the stable output of the engine’s power.

natural gas cleaning and sweeping truck

5. Scanning disk has automatic avoidance protection function and automatic reset function when encountering obstacles.

6. The sweeping speed can be adjusted to select high, medium, and low three gears according to various cleaning conditions, which can ensure a good cleaning effect under various pollution conditions.

7. It adopts an advanced and efficient dedicated fan with excellent anti-vibration and anti-corrosion performance.

natural gas cleaning and sweeping truck

8. The front and rear clean water tanks made of high-quality stainless steel have a large volume and a long working time.

9. The self-made wear-resistant sweeping brush is adopted, which greatly reduces the use cost.

03. Scope of application of natural gas scrubber

Natural gas cleaning and sweeping vehicles have a wide range of uses, such as the cleaning of roads, streets, and open squares are the most common application scenarios. Nowadays, the application scenario that is slowly heating up is construction sites, and towns, rural areas, scenic spots, and other places have also begun to use sweeping vehicles.

natural gas cleaning and sweeping truck

1. Cleaning of municipal road auxiliary roads, sidewalks, slow lanes, road railings, and bridge railings.

2. Cleaning of small advertisements in urban lampposts, telephone poles, billboards, bus stops, telephone booths, and other places, as well as washing of scribbled walls.

natural gas cleaning and sweeping truck

3. Flushing of garbage transfer stations and filling sites, cleaning of incineration equipment and small waterways, flushing of large food stalls, and disposal of residues in trash cans.

4. Cleaning of roads and pavements in scenic areas and parks.

natural gas cleaning and sweeping truck

5. Sanitation and cleaning of rural towns and streets.

04. Working video of natural gas washing and sweeping truck

RELATED NEWS